 |
 |
 |
|
|
 |
|
 |
Set points
Set points by entering Northing & Eastings or pick a point. (if you pick a point on a 3D object,
the elevation will be used for the point). You may also set points by entering a station and offset.
Automatic Linework and point symbols!
Note: Whenever you add points to the drawing
a user definable block can also be placed there automatically, such as an iron
pipe or a power pole etc. Linework may also be imported from field
codes.
|
|
Boundary Traverse and Sideshot
Set points using a boundary traverse or sideshot with turned angle, North azimuth or South azimuth (use vertical angle
or difference in elevation).
Radial stakeout
Select the points you need for a radial stakeout. Create a radial
stakeout report using Turned Angle or North or South Azimuth.
Inverse
Inverse points by entering the point number.
Intersections
Find intersections by Bearing - Bearing,
Bearing - Distance, Az - Az, Az - Distance, Distance - Distance, Line - Arc, and
Point offset to a line.
Draw by point number
You may draw a line from point to point by entering the point number.
Import / Export
Import points from an ascii file or export points to an ascii file. A
file is created with Point Number, Northing, Easting, Elevation and Description.
You may also create a Point List for viewing in the same format.
Manipulate points
You may manipulate points in the drawing by moving or rotating them, you may change the elevation of a group of points,
you may resize existing points in the drawing and you may also pivot the points about their placement point.
|
|
Labels
You may label the bearing (or North or South Azimuth) and distance of a
line by selecting it or by picking points. You may label a curve (radius, length)? or (delta, radius, tangent, length and chord bearing & length) by
selecting it or by picking points.
Label coordinates by picking a point.
Label areas by selecting a closed polyline.
Label station and offset from an alignment (line, polyline or arc).
Listing
You may list the bearing and distance of a line by selecting it.
You may list a curve (delta, radius, tangent, length and chord bearing & length) by selecting it.
Compute Areas
You may let the program automatically compute lot areas by Slide Bearing or Radial
methods.
Drafting Aids
To help you in creating your drawing, we offer a collection of drafting aids. You
may import a text file, insert a graphic scale or place crowsfeet on a line. You
may Label stations on an alignment, create a profile coordinate system, label
elevations by picking and extract a profile from 3d faces or from 3D lines. You
may place text in a line or find and replace text in the drawing.
Traverse and Label Plus Closure Reporting and our Utilities package is included in this package!
|
|
| |
|
Travers & Label is Trademark CogoSoftware
|
|
|
cadian.com
| Tel : 82 (2) 323-0286 | Fax : 82 (2) 2107-3286