 |
 |
 |
Traverse and Label is also included with Survey, Cogo and Drafting.
|
|
|
 |
|
1. Traverse and Label
2. Traverse and Label plus Closure Reporting
|
|
| 1. Traverse and Label |
Traverse and Label allows you to
draw a traverse using Bearing and Distances. You may also enter curves to the
left or right (Radius and Arc length).
You may also label any lines in the
drawing by bearing and distance and curves by radius and arc
length.
The following are menu items (commands) found in the program:
|
 |
Drawing Setup
Select English or Metric units -changes the ltscale and labeling precision, changes
dimscale to the scale of the drawing, it changes textsize to one tenth the
drawing scale (English) and to 3mm (Metric) and it changes other dimension variables.
NOTE: You may edit dpset.lsp in the Dplabel directory if you want to change these
settings. You may use notepad to edit this file.
Draw Traverse
Draw by entering bearings and distances and curves. Good for inputing an existing boundary.
Labels
You may label the bearing and distance of a line by selecting it or by picking points.
You may label a curve (radius, length)? or (delta, radius, tangent, length and chord bearing & length) by selecting it or by picking point
NOTE: LABELING WILL USE THE UNITS
(ENGLISH OR METRIC) THAT IS SELECTED IN DRAWING SETUP. LABELING WILL ALSO USE
THE CURRENT PRECISION SETTINGS
|
|
Label lines
Label by selecting a line
Brg dist / - Label bearing and distance on top of line.
/ Brg Dist - Label bearing and distance on bottom of line.
Brg / Dist - Label bearing on top and distance on bottom of line.
Dist / Brg - Label distance on top and bearing on bottom of line.
Dist / - Label distance on top of line.
/ Dist - Label distance on bottom of line.
Note - Label bearing and distance with a leader to a line.
Label lines (point)
Label by selecting 2 points for a line
Brg dist / - Label bearing and distance on top of line by selecting points.
/ Brg Dist - Label bearing and distance on bottom of line by selecting points.
Brg / Dist - Label bearing on top and distance on bottom of line by selecting points.
Dist / Brg - Label distance on top and bearing on bottom of line by selecting points.
Dist / - Label distance on top of line by selecting points.
/ Dist - Label distance on bottom of line by selecting points.
Label curves
Label by selecting a curve
Rad ( Len - Label radius on outside and arc length on inside of curve.
Len ( Rad - Label arc length on outside and radius on inside of curve.
Len ( - Label arc length on outside of curve.
( Len - Label arc length on inside of curve.
Note - Label Delta, Tangent, Arc length, Radius, Chord bearing and Chord distance in a note off the curve.
Label curves (point)
Label by selecting 3 points to define a curve (center start end - counterclockwise)
Rad ( Len - Label radius on outside and arc length on inside of curve.
Len ( Rad - Label arc length on outside and radius on inside of curve.
Len ( - Label arc length on outside of curve.
( Len - Label arc length on inside of curve.
Label areas
Label areas in square feet and acres (or Hectares) by selecting a closed polyline.
|
|
| 2. Traverse and Label plus Closure Reporting |
Traverse and Label Plus allows you to draw a traverse using Bearing or Azimuth and Distances.
You may also enter curves to the left or right (Radius and Arc length).
You may also label any lines in the drawing by bearing or azimuth and distance and curves by radius and arc length.
After a traverse or boundary is drawn you may select the traverse or boundary and print out a traverse and closure
report describing each leg of the traverse along with the area and error of closure.
The following are menu items (commands) found in the program:
|
Drawing Setup
Select English or Metric units -changes the ltscale and labeling precision, changes
dimscale to the scale of the drawing, it changes textsize to one tenth the drawing
scale (English) and to 3mm (Metric) and it changes other dimension variables.
NOTE: You may edit dpset.lsp in the Dplabel directory if you want to change these settings.
You may use notepad to edit this file.
Draw Traverse
Draw by entering bearings or azimuths and distances and curves. Good for inputing an existing boundary.
Labels
You may label the bearing and distance of a line by selecting it or by picking points.
You may label a curve (radius, length) or (delta, radius, tangent, length and chord bearing & length) by selecting it or by picking points.
NOTE: LABELING WILL USE THE UNITS
(ENGLISH OR METRIC) THAT IS SELECTED IN DRAWING SETUP. LABELING WILL ALSO USE THE CURRENT PRECISION SETTINGS.
|
|
Label lines BRG
Label by selecting a line
Brg dist / - Label bearing and distance on top of line.
/ Brg Dist - Label bearing and distance on bottom of line.
Brg / Dist - Label bearing on top and distance on bottom of line.
Dist / Brg - Label distance on top and bearing on bottom of line.
Dist / - Label distance on top of line.
/ Dist - Label distance on bottom of line.
Note - Label bearing and distance with a leader to a line.
|
|
point to point
Label by selecting 2 points for a line
Brg dist / - Label bearing and distance on top of line by selecting points.
/ Brg Dist - Label bearing and distance on bottom of line by selecting points.
Brg / Dist - Label bearing on top and distance on bottom of line by selecting points.
Dist / Brg - Label distance on top and bearing on bottom of line by selecting points.
Dist / - Label distance on top of line by selecting points.
/ Dist - Label distance on bottom of line by selecting points.
|
Label lines AZN
Label by selecting a line
Azn dist / - Label North azimuth and distance on top of line.
/ Azn Dist - Label North azimuth and distance on bottom of line.
Azn / Dist - Label North azimuth on top and distance on bottom of line.
Dist / Azn - Label distance on top and North azimuth on bottom of line.
Dist / - Label distance on top of line.
/ Dist - Label distance on bottom of line.
Note - Label North azimuth and distance with a leader to a line.
point to point
Label by selecting 2 points for a line
Azn dist / - Label North azimuth and distance on top of line by selecting points.
/ Azn Dist - Label North azimuth and distance on bottom of line by selecting points.
Azn / Dist - Label North azimuth on top and distance on bottom of line by selecting points.
Dist / Azn - Label distance on top and North azimuth on bottom of line by selecting points.
Dist / - Label distance on top of line by selecting points.
/ Dist - Label distance on bottom of line by selecting points.
|
|
Label lines AZS
Label by selecting a line
Azs dist / - Label South azimuth and distance on top of line.
/ Azs Dist - Label South azimuth and distance on bottom of line.
Azs / Dist - Label South azimuth on top and distance on bottom of line.
Dist / Azs - Label distance on top and South azimuth on bottom of line.
Dist / - Label distance on top of line.
/ Dist - Label distance on bottom of line.
Note - Label South azimuth and distance with a leader to a line.
point to point
Label by selecting 2 points for a line
Azs dist / - Label South azimuth and distance on top of line by selecting points.
/ Azs Dist - Label South azimuth and distance on bottom of line by selecting points.
Azs / Dist - Label South azimuth on top and distance on bottom of line by selecting points.
Dist / Azs - Label distance on top and South azimuth on bottom of line by selecting points.
Dist / - Label distance on top of line by selecting points.
/ Dist - Label distance on bottom of line by selecting points.
|
|
Label curves
Label by selecting a curve
Rad ( Len - Label radius on outside and arc length on inside of curve.
Len ( Rad - Label arc length on outside and radius on inside of curve.
Len ( - Label arc length on outside of curve.
( Len - Label arc length on inside of curve.
Note Brg - Label Delta, Tangent, Arc length, Radius, Chord bearing and Chord distance in a note off the curve.
Note Azn - Label Delta, Tangent, Arc length, Radius, Chord Azimuth North and Chord distance in a note off the curve.
Note Azs - Label Delta, Tangent, Arc length, Radius, Chord Azimuth South and Chord distance in a note off the curve.
Label curves (point)
Label by selecting 3 points to define a curve (center start end - counterclockwise)
Rad ( Len - Label radius on outside and arc length on inside of curve.
Len ( Rad - Label arc length on outside and radius on inside of curve.
Len ( - Label arc length on outside of curve.
( Len - Label arc length on inside of curve.
Label areas
Label areas in square feet and acres (or Hectares) by selecting a closed polyline.
Closure Reports
Print a detailed traverse and closure report using Bearings or Azimuths describing each leg of the traverse along with the area and error of closure.
|
|
| |
|
Travers & Label is Trademark CogoSoftware
|
|
|
cadian.com
| Tel : 82 (2) 323-0286 | Fax : 82 (2) 2107-3286